Microwave synthesis of worm-like SiC nanowires for thin electromagnetic wave absorbing materials

Thin thickness is always the pursuit of excellent electromagnetic wave absorbing materials. Herein, SiC nanowires with worm-like morphology were synthesized by microwave heating the mixture of expanded graphite and silica. The worm-like SiC nanowires exhibit an excellent microwave absorption ability at a thin thickness. With the filling ratio of SiC nanowires increases in the matrix, the dielectric loss and microwave absorbing ability are significantly enhanced; meanwhile the number of absorption peaks is gradually increased, and the absorption peaks also move toward a thinner thickness. When the nanowires filling ratio was 40?wt%, the minimum reflection loss reached down to ?35.2?dB and the effective absorption (RL?<??10?dB) bandwidth was 1.8?GHz?at a thickness of 1.3?mm. The possible growth mechanism of the worm-like SiC nanowires is that the intermediate reaction gas phases, SiO and CO, were confined in the relatively independent tiny pores of expanded graphite. This resulting in an excessive local gas phase pressure, which causes the nanowire growth direction changes randomly.     

固体自拉曼激光器多波长输出研究

实验对比了a切和c切的Nd∶YVO4晶体作为激光晶体时,激光器输出光光谱及输出功率上的区别。设计了一种小型化固体自拉曼多波长激光器,实验证明通过调节倍频晶体BBO的角度,可实现多波长选择性输出及同时输出,并测量了其输出光谱及单波长输出时的功率。     

Ductile-brittle transition mechanisms of amorphous glass subjected to taper grinding experiment

Taper grinding experiments were conducted in this paper to investigate the continuous and complete ductile-brittle transition process of two kinds of amorphous glass: high purity fused silica (HPFS) which is silica rich glass and soda-lime silica glass (SLSG) which is low silica glass. The grinding force, ground surface morphology, surface roughness, and subsurface damage depth induced during different stages of taper grinding were all analyzed. A mathematical model describing the cutting force of a grit and micro-crack length was established to clarify the ductile-brittle transition mechanisms of isotropic material. The model revealed that material removal mechanisms and grinding force were mainly determined by the crack equivalent length in front of the grit and its equivalent cutting force. The ground surface roughness and subsurface damage depth were mainly affected by the cutting force of the grit and length of cracks behind it. The ductile machinability of SLSG was better than that of HPFS due to the bonding of metallic atoms in SLSG with nonbridging oxygens, as well as their packing into free volume in SiO₂ network.     

水电企业在新形势下的水库调度管理

本文以龙溪河梯级水电站水库和大洪河水电站水库为研究对象,列出了水电企业在新形势下做好水库调度管理工作的6个方面内容,即:确保水库安全度汛是水电厂的责任和底线;水文预报是基础;水文信息化是重要的手段;完善水库调度运用计划方案是必要措施;严格落实生态环保要求是水电企业主体责任;正确处理水库调度中的"六个关系".可为水库做好水库防洪减灾和经济运行工作提供参考.     

Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 via titanium and boron co-doping

Titanium and boron are simultaneously introduced into LiNi_0.8Co_0.1Mn_0.1O₂ to improve the structural stability and electrochemical performance of the material. X-ray diffraction studies reveal that Ti⁴⁺ ion replaces Li⁺ ion and reduces the cation mixing; B³⁺ ion enters the tetrahedron of the transition metal layers and enlarges the distance of the [LiO₆] layers. The co-doped sample has spherical secondary particles with elongated and enlarged primary particles, in which Ti and B elements distribute uniformly. Electrochemical studies reveal the co-doped sample has improved rate performance (183.1 mAh·g^-1 at 1 C and 155.5 mAh·g^-1 at 10 C) and cycle stability (capacity retention of 94.7% after 100 cycles at 1 C). EIS and CV disclose that Ti and B co-doping reduces charge transfer impedance and suppresses phase change of LiNi_0.8Co_0.1Mn_0.1O_2.     

Hierarchical FeC/MnO2 composite with in-situ grown CNTs as an advanced trifunctional catalyst for water splitting and Metal−Air batteries

In high demand is developing trifunctional electrocatalysts to simultaneously drive hydrogen evolution reaction (HER) and oxygen evolution/reduction reaction (OER/ORR) for metal-air batteries and water splitting. Here we develop the carbon nanotubes (CNTs)-grafted FeC/MnO₂ nanocomposite catalyst by carbonizing FeMn metal-organic frameworks. The synergistic effect between FeC and MnO₂ dominantly contributes the ORR, OER, and HER. The transition metal-mediated growth of CNTs by an in-situ catalysis mechanism enables high electrical conductivity, abundant active sites, as well as efficient reaction pathways. The optimized chemical composite and unique hierarchical structure endow the FeC/MnO₂ with low overpotentials for multiply electrochemical reactions. Consequently, the composite catalyst successfully serves as the bifunctional electrode for water splitting with a voltage of 1.66 V at 10 mA cm^?2 as well as the cathode for all-solid-state metal-air battery with Pt/C-comparable performance. The advanced transition metal composite presented in this work provides the guidance for rationally developing trifunctional electrocatalysts for efficient integrated energy conversion systems.     

Wear and thermal behavior of basalt fiber reinforced rice husk/polyvinyl chloride composites

Plant fiber reinforced polymer composites (PFRPs) in practical application are often subjected to both complex friction and variable temperature environments. The present work explores the possibility of reinforcing rice husk/polyvinyl chloride (RH/PVC) composites with basalt fibers (BF) for developing a new wear resistant material with improved thermal stability. The results showed that the structural strength and wear resistance of the composites increased at first and then decreased with an increasing ratio of BF/RH, the highest value occurred at a BF/RH ratio of 8/42. The thermal stability of composites had a positive relationship with BF/RH ratio. The composites added with BF all possessed improved performance in comparison with unadded composites. Hence, the findings of this article proposed some new perspectives on improving the wear resistance and thermal stability of PFRPs that would broaden their practical application.     

Centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates using a femtosecond laser with square-shaped Flat-Top focus spots

Femtosecond (fs) lasers have been proved to be reliable tools for high-precision and high-quality micromachining of ceramic materials. Nevertheless, fs laser processing using a single-mode beam with a Gaussian intensity distribution is difficult to obtain large-area flat and uniform processed surfaces. In this study, we utilize a customized diffractive optical element (DOE) to redistribute the laser pulse energy from Gaussian to square-shaped Flat-Top profile to realize centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates. We systematically investigated the effects of processing parameters on the changes in surface morphology and composition, and an optimal processing strategy was provided. Mechanisms of the formation of surface nanoparticles and the removal of surface micro-burrs were discussed. We also examined the distribution of subsurface defects caused by fs laser processing by removing a thin surface layer with a certain depth through chemical mechanical polishing (CMP). Our results show that laser-induced periodic surface structures (LIPSSs) covered by fine SiO₂ nanoparticles form on the fs laser-processed areas. Under optimal parameters, the redeposition of SiO₂ nanoparticles can be minimized, and the surface roughness Sa of processed areas reaches 120 ± 8 nm after the removal of a 10 μm thick surface layer. After the laser processing, micro-burrs on original surfaces are effectively removed, and thus the average profile roughness Rz of 2 mm long surface profiles decreases from 920 ± 120 nm to 286 ± 90 nm. No visible micro-pits can be found after removing ~1 μm thick surface layer from the laser-processed substrates.     

Ultrahigh and field-independent energy storage efficiency of (1-x)(Ba0.85Ca0.15)(Zr0.1Ti0.9)O3-xBi(Mg0.5Ti0.5)O3 ceramics

Relaxor ferroelectrics are attracting an increasing interest in the application of pulse power systems due to their excellent energy storage performance. In this paper, the (1-x)(Ba_0·85Ca_0.15)(Zr_0·1Ti_0.9)O₃-xBi(Mg_0·5Ti_0.5)O₃ ((1-x)BCZT-xBMT, x ≤ 0.2) relaxor ceramics are prepared by the solid state method. The influence of BMT on the microstructure, dielectric and energy storage properties of the prepared ceramics is investigated. The XRD results show that the peak intensity of impurities (Bi₂O₃, TiO₂ and Ba₂Bi₄Ti₅O₁₈) is gradually stronger than that of BCZT phase with x increasing. Meanwhile, the grain size of (1-x)BCZT-xBMT ceramics gradually increases on account of the appearance of impurities Bi₂O₃. Influenced by the impurities and BMT, the dielectric constant of prepared ceramics gradually decreases with x increasing. A large W_rec value of 0.65 J/cm³ with an ultrahigh η value of 97.89% is achieved at x = 0.15 due to the high breakdown strength and slim P-E hysteresis loop. Meanwhile, the η is insensitive to the electric field. The ultrahigh η leads to lesser energy loss during the charge and discharge process. It makes the 0.85BCZT-0.15BMT ceramic more attractive in the application of pulse power systems.